The PetrolPlaza audio version is presented to you by UNITI expo 2022, the leading retail petroleum and car wash trade fair in Europe.

English Français Русский Pre-adjustable electronic tyre pressure gauges - ALF - Tronik Line for petrol stations, workshops and industry by JS Aupperle GmbH

The inflators of the ALF Tronik TS line are electronic, preset units to correct the tyre pressure. They have been developed especially for the use at petrol stations. The models of this line can be used to inflate passenger car tyres (max. set pressure 5bar) as well as truck tyres (max. set pressure 10bar).



Last update: | Advertorial
Pre-adjustable electronic tyre pressure gauges - ALF - Tronik Line for petrol stations, workshops and industry by JS Aupperle GmbH

The appealing design and the user friendly alignment of the illuminated pushbuttons make the operation very easy. The set pressure values are easy to read on the two large, illuminated LC-displays even in bad lighting conditions. The pictograms which are aligned on the right side serve as a brief instruction and guide you step by step through the operation.

PETROL STATION

Pedestal unit

Technical data:

  • Maximum inflation pressure: 10 bar
  • Display range: 0 - 10 bar
  • Display range changeable between bar/psi
  • Reading accuracy: 0.1 bar
  • Tolerance: < 0.08 bar
  • Power supply: 230 V 50/60 Hz
  • IP rating: IP 54
  • Temperature: -10 to +50 °C
  • Powder-coated pedestal with anti-corrosive protection (RAL 9006 white aluminium) 

Extra equipment:

  • Coin validator
  • Water connection and/or air connection for ALF® Klassik analog or digital

Approx. dimensions:

  • Width: 30 cm
  • Height: 152 cm
  • Depth: 24 cm
  • Weight: 20 kg


Order no.: 200 510
(can be calibrated)

Standard equipment:

  • Powder-coated stainless steel housing (RAL 7016 anthracite grey)
  • Fixing bracket for wall mounting
  • Display of set and actual pressure on two easy to read LC-displays with 30 mm digit height and background lighting
  • Illuminated pushbuttons, also easy to operate in bad lighting conditions (only one pushbutton illuminates with workshop version)
  • Audible and visual display when inflation is completed
  • Maximum inlet pressure 16 bar (not with ALF - Tronik 3000)
  • Fault tracing via displayed error codes
  • 8 m inflating hose with specially curved twin hold-on connector, also suitable for valves that are difficult to access; hose holder included (not for ALF - Tronik 3000 and OEM)

Related contents